Brad,
I saw that in the do***entation and the file exists. I have not idea if
it is correct, but it is there. Strangely I cannot run the application
if I use the newer DOS utilities that I installed on the server. It only
works with the old version 5.0 that it came with. I am not overly
impressed with the programmers talents at this point.
There is nothing in the batch file about BUTIL, so I will assume that
BUTIL is being called from the bmmenu5.exe, which is being called from
the batch file. Is there any debug utilities out there that I can run to
see what is actually happening?
thanks again for the help.
Robert
Brad Kunkel wrote:
> The do***entation says the following:
> --------------
> BUTIL-1: Message file initialization failed
> Only BUTIL.EXE in DOS returns this message. The utility could not find
the
> BUTILDOS.MSG file, which contains messages that the utility uses. Ensure
> that you installed NetWare Communication Services correctly.
>
> --------------
>
> What BUTIL command is being run after you log out. The command is
probably
> in the batch file that runs the application in question. If the command
is
> BUTIL -STOP try REMing that out and inserting BREQUEST /U instead.
>
> HTH,
>
> Brad Kunkel
> Integrated Business, Inc.
>
>
> "Robert" <hockey@[EMAIL PROTECTED]
> wrote in message
> news:VRvEj.98998$w94.56134@[EMAIL PROTECTED]
>> I can login and the interface seems to work for most of it, but when I
log
>> out I get an error from Butil that says:
>>
>> BUTIL-1:Wrong version of message file or message file not found.
>>
>> Any suggestions?
>>
>> Thanks again for all the help.
>>
>> Robert
>>
>> Robert wrote:
>>> Thanks Brad. That seemed to work. I will have to test it to make sure
>>> that all the components work.
>>>
>>> Thanks again for the help.
>>>
>>> Robert
>>>
>>> Brad Kunkel wrote:
>>>> What you can do is REM the line that loads the driver in CONFIG.NT.
>>>> This will disable the DOS file access in the Pervasive Client. After
>>>> that go back to using BREQUEST and it should work. You may also have
to
>>>> re-install the Netware client and include IPX/SPX sup****t. Actually,
>>>> IPX/SPX may need to be enabled on the server as well.
>>>>
>>>> HTH,
>>>> Brad Kunkel
>>>> Integrated Business, Inc.
>>>>
>>>>
>>>> "Robert" <hockey@[EMAIL PROTECTED]
> wrote in message
>>>> news:wphCj.85978$pM4.52216@[EMAIL PROTECTED]
>>>>> Thanks for the reply. The CONFIG.NT is there and it says it is going
to
>>>>> load the btrdrvr.sys file. I cannot get the application to load, so
I
>>>>> have to think that the application will not run without the BREQUEST
>>>>> and BUTIL functions working. I get an error from both.
>>>>>
>>>>> Thanks again for the help.
>>>>>
>>>>> Robert
>>>>>
>>>>> Brad Kunkel wrote:
>>>>>> If you installed the 9.5 client on your XP computer then there is
>>>>>> driver installed in CONFIG.NT that loads with the command prompt.
Try
>>>>>> running the application or whatever without first loading BREQUEST.
>>>>>> It should work. If not, there are other ways to make it work.
>>>>>>
>>>>>> If your network has W98 computers, load BDOSSTUB instead of
BREQUEST
>>>>>> on those workstations.
>>>>>>
>>>>>> HTH,
>>>>>> Brad Kunkel
>>>>>> Integrated Business, Inc.
>>>>>>
>>>>>>
>>>>>> "Robert" <hockey@[EMAIL PROTECTED]
> wrote in message
>>>>>> news:a_UBj.76087$w94.36138@[EMAIL PROTECTED]
>>>>>>> Hello all,
>>>>>>>
>>>>>>> I am not very familiar with Pervasive software, so these might
seem
>>>>>>> like really basic questions, but we have a Novell 4.12 server
running
>>>>>>> an old Dos application that uses Btrieve version 5 and we want to
>>>>>>> upgrade to something newer. I have a Netware 6.5 server running
and I
>>>>>>> think I have correctly installed the Pervasive 9.5 for Netware
>>>>>>> package, but I cannot connect to it from a Dos prompt on a Windows
XP
>>>>>>> computer. The Novell is working correctly, but if I run BREQUEST
from
>>>>>>> the workstation I get:
>>>>>>> BREQUEST-10: the function IPXInitialize returned an error.
>>>>>>>
>>>>>>> If I try BREQTCP I get:
>>>>>>> BREQTCP-10: The function InitSocketLibrary returned an error.
>>>>>>>
>>>>>>> I am not tied to any OS and would be open to any and all
suggestions
>>>>>>> including a complete migration to Linux.
>>>>>>>
>>>>>>> Any help would be greatly appreciated.
>>>>>>>
>>>>>>> Robert
>
>
|
