Re: Same form, but one system GPFs...?

On Tue, 12 Feb 2008 17:29:44 -0500, "Rodney Wise"
<NoSpamPlease-rodney@[EMAIL PROTECTED]
> wrote:

>Kenneth,
>
>Check out the BDE settings for the 2K PC that runs OK and see if they are

>different on the one that doesn't and make them the same.
>
>Especially the setting for "SHAREDMEMLOCATION".
>
>
>If that doesn't work, try changing the SHAREMEMLOCATION  to   6BDE

Hi again,

Here is the current situation:

I checked the Win 2000 Pro system that has the problem and
its BDE settings were exactly the same as those on the XP
system that works properly.

After seeing that, I tried the 6BDE entry you had suggested,
but the problem remained. I then removed the new entry and
left the BDE settings as they were.

Next, I looked at the BDE settings on the Win 2000 box on
which the form works properly.

Those settings are NOT the same as on the offending system
(also Win 2000 Pro.)

On the machine with the problem I see:

MaxBufferSize = 16384
MinBufferSize = 8192

but on the second Win 2000 system (where the form runs
properly), I see:

MaxBufferSize = 2048
MinBufferSize = 128

Those two systems are not in the same building so I won't
have the op****tunity to modify the problem machine to match
the good one this evening, but I can certainly do it
tomorrow.

Also, I do have a Dr. Watson error, but apparently left it
in my office, so that will have to wait for morning.

Thanks again for any further help,
-- 
Kenneth

If you email... Please remove the "SPAMLESS."